This document describes how to setup and configure the STE-502C Serial-Ethernet Server. This information can also be used as a general guide when setting up other Serial-Ethernet Server models. Also refer to the STE-502C User’s Manual which is available on the CD included with the device.
Setup
Once the device is plugged into the network, insert the DVD. Open the folder for the appropriate brand of Devolinx or Antaria device and navigate to the CONFIG folder. Double-click MONITOR.
Select the device and choose Config.
Edit the information and designate fields as desired to match the domain’s network.
The Devolinx or Antaria device will beep several times and the window below will appear to show changes have been made.
In the CONFIG folder, run the Setup_SerialMgr_AA_v481 application as shown below.
Log into the web configuration of the serial server using the static IP address previously assigned.
Setup using a Cardinal Model 205 Scale is as follows:
The COM Type Selection is based on the Scale used. Refer to the Scale Manual as to what type to select.
Open the Serial/IP Control Panel window.
Select the COM port to use and configure it using the static IP address and port number established in the web configuration. Make sure the Restore Failed Connections option is checked.
Select Configuration Wizard to confirm proper settings.
If the result is as shown above, choose Use Settings.
Change the COM port selection in Agvance to match the designated COM port selected above.
